| |
|
|
| |
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PC CAN
Hardware |
|
|
|
|
|
Gateways
|
|
| |
|
|
|
PCAN-Ethernet Gateway FD DR |
|
|
|
|
|
|
The PCAN-Ethernet Gateway FD DR
allows access to classic CAN or
modern CAN FD buses via an IP
network. On top of that, CAN
buses can be connected to each
other via IP using multiple
devices. CAN frames are wrapped
in TCP or UDP message packets
and then forwarded via the IP
network from one device to
another. The PCAN-Ethernet
Gateway FD DR provides a LAN
interface and two CAN FD
interfaces that allow bit rates
up to 10 Mbit/s. For this, an
AM5716 Sitara processor provides
the needed performance. |
|
|
|
|
|
|
|
|
|
| |
|
|
| |
|
|
|
|
|
|
|
|
|
PCAN-LIN
|
|
| |
|
|
|
| The PCAN-LIN module
enables CAN, LIN, and serial participants to communicate. The module
is
supplied in a plastic casing and includes firmware which enables data
to
be exchanged between the different bus systems. Various modes can be
set
up with the aid of configuration software. Then for instance the
module
acting as the LIN master can request data and route the incoming LIN
data to the CAN bus and/or the serial interface. Data can be routed
between CAN and LIN with an ID offset. |
|
|
|
|
|
|
|
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
