ess logo  
 
 
 
     
     
  Products  
     
 
 
     
 
 
     
  Events & Promos  
 
 

 

 
 
     
  ESA IUP-UXP  
     
 

ESA IUP-UXP is an advanced version of our earlier model ESA IUP-XP, which works through a PC’s parallel port & USB port. It features a 48 pin universal pin driver and an expandable TTL pin driver. It supports over 7000 devices including PAL, GAL, CEPAL, EPLD, PEEL, MAX, MACH, PLSI, EPROM, MPU /MCU etc. ESA IUPUXP works in various operating systems, Windows 9x/NT/2000 and XP.

Data Sheet

 
     
 
 
     
  ESA GP8-XP  
     
 

The ESA GP8-XP is a PC's parallel-port-based gang programmer. It features 8 pcs fully isolated 48-pin ZIF sockets, extremely high throughput, standard 5V and 3V chip support, device insertion and continuity check. With PC-based design the device update through software gives customer more flexible and quick access to the new chip support. The ESA GP8-XP supports EPROM, EEPROM, FLASH in the introduction. Future software update will include 87C5x, 89C5x , and PIC16Cxx microprocessor. The ESA GP8-XP has flexible design. If customer has special chips that not in our standard support list, we provide a special program that allow the ESA GP8-XP become a customize special chip production gang programmer.

Data Sheet

 
     
 
 
     
  ESA UVE  
     
 

EPROM Eraser; UV light source for erasing EPROMS. The Most Elegant & Efficient EPROM Eraser that lets you erase so many devices in a single shot.

Data Sheet

 
     
 
 
     
  ESA IUP - 48 UXP  
     
 
ESA IUP-48UXP is an advanced version of our earlier model ESA IUP-XP and UXP, which works through a PCs parallel port & USB port. It features a 48 pin universal pin driver and an expandable TTL pin driver. Support 5V and 3.3V low voltage devices, 1.8V chip support through low voltage adapter and Option for universal adapter for 44-pin PLCC/ QFP/ TQFP/PSOP and 40/48 TSOP. ESA IUPUXP works on various operating systems, Windows 98SE / ME / 2000 / XP/ Vista/ 718.1/10.
 
     
 
  
 
     
  Turbo Gang Programmer (LabTool-848XP)  
     
 
The ESA GP8-XP is a PC's USB and parallel-port-based gang programmer. 8 independent fully isolated 48-pin ZIF sockets, extremely high throughput, standard 5V and 3V chip support, device insertion and continuity check. With PC-based design the device update through software gives customer more flexible and quick access to the new chip support. The ESA GP8-XP supports Universal adapters for 48TSOP/44PSOP/40TSOP Flash chips support. The ESA GP8-XP has flexible design.
 
     
 
  
 
     
  Serial Flash Programmer(LabTool-S100)  
     
 
The LabTool-S100 is PC based USB interface serial flash programmer. Support all serial flash chip from 512Kb upto 2Gb & packages through adapters.

It works with internal USB power, don't need extra power supply and support 3.3V to 1.8V Flash in VCC and I/O and works on various operating systems, Windows 98SE / ME / 2000 / XP/ Vista/ 718.1/10.
 
     
 
  
 
     
  Turbo Flash Programmer (LabTool-T400)  
     
 
LabTool-T400 Turbo Flash Gang Programmer is four sockets PC-based Gang Programmer. It features four independent isolated modules, extremely high speed in writing flash memory chip. It supports 3.3V, 2.7V, 1.8V and 1.2V chip in both VCC and I/O without low voltage converter and handles 8/16/32 bit flash chip in different package through adapter modules, up to 128Gb flash can be support. The LabTool-T400 is an ideal programmer for customers in GSM, 3G Mobile, PDA, Internet router and others.