ess logo  
 
 
 
     
     
  Products  
     
 
 
     
 
 
     
  Events & Promos  
 
     
 

 

 
 
     
  Keil Evaluation Boards  
     
  Keil MCB1760 board  
 

The Keil MCB1700 Evaluation Boards enable you to create and test working programs based on the NXP LPC1700 family of ARM Cortex™-M3 processor-based devices.

 
 

Features

 
 
  • 100MHz ARM Cortex-M3 processor-based MCU
  • On-Chip Memory: 512KB Flash and 64KB RAM
  • Color QVGA TFT LCD
  • 10/100 Ethernet Port
  • USB 2.0 Full Speed - USB, USB-OTG, and USB Host
  • 2 CAN interfaces
  • 2 Serial Ports
  • SD/MMC Card Interface
  • 5-position Joystick and push-button
  • Analog Voltage Control for ACD Input
  • Amplifier and Speaker
  • Up to 70 GPIO
  • Debug Interface Connectors
    - 20-pin JTAG (0.1 inch connector)
    - 10-pin Cortex debug (0.05 inch connector)
    - 20-pin Cortex debug + ETM Trace (0.05 inch connector)
 
     
 
 
     
  Keil MCB1800 Board  
 

The Keil MCB1800 Evaluation Boards enable you to create and test working programs based on the NXP LPC1850 family of ARM Cortex™-M3 processor-based devices.

 
 

Features

 
 
  • 180MHz ARM Cortex-M3 processor-based MCU in LBGA256
  • On-Chip SRAM: 136KB (LPC1857), 200KB (LPC1850)
  • On-Chip Flash: 1MB dual bank (LPC1857), no on-chip Flash (LPC1850)
  • On-Board Memory: 16MB NOR Flash, 4MB Quad-SPI Flash, 16 MB SDRAM, & 16KB EEPROM (I2C)
  • Color QVGA TFT LCD with touchscreen
  • 10/100 Ethernet Port
  • High-speed USB 2.0 Host/Device/OTG interface (USB host + Micro USB Device/OTG connectors)
  • Full-speed USB 2.0 Host/Device interface (USB host + micro USB Device connectors)
  • CAN interfaces
  • Serial/UART Port
  • MicroSD Card Interface
  • 4 user push-buttons + reset
  • Digital Temperature Sensor (I2C)
  • Analog Voltage Control for ACD Input
  • Audio CODEC with Line-In/Out and Microphone/headphone connector + Speaker
  • Debug Interface Connectors
    - 20-pin JTAG (0.1 inch)
    - 10-pin Cortex debug (0.05 inch)
    - 20-pin Cortex debug + ETM Trace (0.05 inch)
 
     
 
 
     
  Keil MCBSTM32F200 Board  
 

The Keil MCBSTM32F200 Evaluation Board enables you to create and test working programs based on the STMicroelectronics STM32 F2xx series of ARM Cortex™-M3 processor-based devices.

 
 

Features

 
 
  • 120MHz STM32F207IG ARM Cortex™-M3 processor-based MCU in 176-pin BGA
  • On-Chip Memory: 1MB Flash & 128KB RAM
  • External Memory: 8MB NOR Flash, 512MB NAND Flash, 2MB SRAM, 8KB I2C EEPROM with NFC interface
  • 2.4 inch Color QVGA TFT LCD with resistive touchscreen
  • 10/100 Ethernet Port
  • USB 2.0 Full Speed - USB, USB-OTG, & USB Host
  • USB 2.0 High Speed - USB, USB-OTG, & USB Host
  • 1 CAN Interface
  • Serial/UART Port
  • MicroSD Card Interface
  • 5-position Joystick
  • 3-axis digital Accelerometer
  • 3-axis digital Gyroscope
  • Analog Voltage Control for ADC Input (potentiometer)
  • Audio CODEC with Line-In/Out and Speaker/Microphone
  • Digital Microphone
  • Digital VGA Camera
  • Push-Buttons for Reset, Wakeup, Tamper and User
  • 8 LEDs directly connected to port pins
  • Power Supply via:
    - High Speed and Full Speed USB (micro) connectors
    - Power jack (8V-12V) with Voltage Regulator capable to supply both USB host interfaces (500mA each)
  • Debug Interface Connectors
    - 20 pin JTAG (0.1 inch connector)
    - 10 pin Cortex debug (0.05 inch connector)
    - 20-pin Cortex debug + ETM Trace (0.05 inch connector)
 
     
 
 
     
  Keil MCBSTM32F400 Board  
 

The Keil MCBSTM32F400 Evaluation Board enables you to create and test working programs based on the STMicroelectronics STM32 F4xx series of ARM Cortex™-M4 processor-based devices.

 
 

Features

 
 
  • 168MHz STM32F407IG ARM Cortex™-M4 processor-based MCU in 176-pin BGA
  • On-Chip Memory: 1MB Flash & 192KB RAM
  • External Memory: 8MB NOR Flash, 512MB NAND Flash, 2MB SRAM, 8KB I2C EEPROM with NFC interface
  • 2.4 inch Color QVGA TFT LCD with resistive touchscreen
  • 10/100 Ethernet Port
  • USB 2.0 Full Speed - USB, USB-OTG, & USB Host
  • USB 2.0 High Speed - USB, USB-OTG, & USB Host
  • 1 CAN Interface
  • Serial/UART Port
  • MicroSD Card Interface
  • 5-position Joystick
  • 3-axis digital Accelerometer
  • 3-axis digital Gyroscope
  • Analog Voltage Control for ADC Input (potentiometer)
  • Audio CODEC with Line-In/Out and Speaker/Microphone
  • Digital Microphone
  • Digital VGA Camera
  • Push-Buttons for Reset, Wakeup, Tamper and User
  • 8 LEDs directly connected to port pins
  • Power Supply via:
    - High Speed and Full Speed USB (micro) connectors
    - Power jack (8V-12V) with Voltage Regulator capable to supply both USB host interfaces (500mA each)
  • Debug Interface Connectors
    - 20 pin JTAG (0.1 inch connector)
    - 10 pin Cortex debug (0.05 inch connector)
    - 20-pin Cortex debug + ETM Trace (0.05 inch connector)