CHIP	Sales Enquiry
	W5100 (WIZnet Hardwired TCP/IP Embedded Ethernet Controller)
	- Support Hardwired TCP/IP Protocols : TCP, UDP, ICMP, IPv4 ARP,    IGMP, PPPoE -10BaseT/100BaseTX Ethernet MAC/PHY embedded - Support Auto Negotiation (Full-duplex and half duplex) - Support Auto MDI/MDIX - Support ADSL connection (with support PPPoE Protocol with PAP/CHAP   Authentication mode) - Support 4 independent sockets simultaneously - Internal 16Kbytes Memory for Tx/Rx Buffers - 0.18 µm CMOS technology - 3.3V operation with 5V I/O signal tolerance - Small 80 Pin LQFP Package - Lead-Free Package - Support Direct and Indirect BUS interface - Support Serial Peripheral Interface(SPI MODE 0, 3) - Support MII Interface - Multi-function LED outputs (TX, RX, Full/Half duplex, Collision, Link,    Speed)
	W3150A+  (Fully Hardwired TCP/IP stack)
	- Support ADSL connection (with PPPoE) - Improved & simplified internal register accesses and command operations - TCP, UDP, IP, ARP, ICMP, IGMP, PPPoE, MAC - High Throughput; 8051(max. 1Mbps), AVR (max. 8Mbps), ARM7 (max.   21Mbps) - 10/100 Base-T Ethernet (Auto detection) - Supports 4 independent Sockets simultaneously (Dynamic buffer allocation    for each channel) and can be interfaced with any Physical Layer (PLC,    Wireless, etc.) - Full-duplex mode - Standard MII interface for physical layer  - 16Kbytes data buffer embedded - Simple socket API interface - 0.18 µm CMOS technology - 3.3V operation, 5V tolerant I/Os - Temperature Range from -40°C to 80°C - DHCP, TELNET, FTP, HTTP, DNS source codes are provided with EVB  - All source codes are written in ANSI C totally free - 64pin LQFP RoHS compliance

	Modules	Sales Enquiry
	Embedded Internet Connectivity Module Family is mini and drop-in network module including TCP/IP hardwired Chip W3150A+, Ethernet PHY and Magnetic and RJ45 with other glue logics. It's possible for the user to connect any systems to the Internet within a reduced development time.
	NM7010B+(WIZnet Chip Network Module) Plug-in module Usable without H/W design for W3150A+, PHY Chip, Transformer and RJ-45 Available for  fast evaluation of W3150A+ and MCU in the target board Supports MCU BUS and SPI Interface  Supports MDIX (auto detection of crossover) Supports network status indicator LEDs - Link, 10/100, Collision  NM7010A (WIZnet Chip Network Module) Plug-in module usable as it is without re-designing schematic of W3100A-LF,  PHY chip, Transformer, and RJ45 into target board Module rapidly to evaluate W3100A-LF with MCU of target board All MCU interface modes of W3100A-LF such as non-clocked, clocked,  external-clocked supported Link, 10/100, Collision LED signals available  EG-SR-7150MJ (Ethernet Gateway Serial-to-Ethernet) -Ready-to-Go Serial to Ethernet Gateway module mounted with RJ-45   connector  - Serial Command Support         - Simple Command Frame Format         - Comprehensive & Readable Command Set for Network and Serial           Settings         - Available of on-site Configuration without PC  - High Stability & Reliability by using W3150A WIZnet Chip (Fully    Hardwired  TCP/IP Stack)  - Easy and Powerful Configuration Program  - 10/100Mbps Ethernet Interface, Max, 230Kbps Serial Interface

	WIZnet Chip Evaluation Boards	Sales Enquiry
	W5100E01-AVR - Full-Duplex Data Transfer up to 6Mbps with Atmega128 - Internet Application Protocols : ANSI C Source Codes such as TCP, UDP,   DHCP - By using external 96pin connectors, AVR’s all pins can be used coping with   developer’s needs - Available of testing SPI Interface - Provides various application source codes : Loopback, Webserver, Ping   Support ISP & JTAG Interface EVBPIC24  - Full-Duplex Data Transfer up to 6Mbps with PIC24 - Internet Application Protocols : ANSI C Source Codes such as TCP,    UDP, DHCP - By using external 96pin connectors, PIC24’s all pins can be used coping    with developer’s needs  - Provides various application source codes : Loopback, Webserver, Ping - Support  ICSP Interface EVB-B1+  - Full-Duplex Data Transfer up to 8Mbps with Atmega128 - Internet Application Protocols : ANSI C Source Codes such as TCP,    UDP, DHCP - By using external 96pin connectors, AVR’s all pins can be used coping      with developer’s needs  - Available of testing SPI Interface - Provides various application source codes : Loopback, Webserver, Ping    Support ISP & JTAG Interface  EG-SR-7150MJ-EVB (Ethernet Gateway Serial-to-Ethernet Evaluation Board) - Ready-to-Go Serial to Ethernet Gateway module mounted with RJ-45   connector - Serial Command Support      - Simple Command Frame Format      - Comprehensive & Readable Command Set for Network and Serial         Settings      - Available of on-site Configuration without PC - High Stability & Reliability by using W3150A WIZnet Chip (Fully Hardwired   TCP/IP Stack) - Easy and Powerful Configuration Program - 10/100Mbps Ethernet Interface, Max, 230Kbps Serial Interface ASRB - Parallel  - Convert Parallel Printer to Ethernet Printer - Support Compatibility mode(IEEE-1284) - System Stability by using Fully Hardwired TCP/IP Chip - ATmega 128 RISC AVR MCU - up to 16 MIPS throughput - 128Kbyte In-System Programmable Flash ROM - 32Kbyte External SRAM - 4Kbyte In-System Programmable EEPROM - Provide Schematics and Firmware Source Code  - Support DHCP - Firmware upgrade through network - Support Auto MDIX function (auto-detecting direct & crossover cable) - RoHS Compliant  ASRB - Serial   All-made Reference Board for Serial Device - Simple and quick network implementation - Providing all source code, hardware schematic, and reference materials    that are dedicated to the function of Serial to Ethernet - Available of firmware customization for various serial devices - Serial Command Support      - Simple command frame format      - Comprehensive & readable command set for network and serial settings      - On-site configuration without PC - High stability & reliability by using a W3150A+ WIZnet Chip, a fully-     hard wired TCP/IP stack - Easy and powerful configuration program - 10/100Mbps Ethernet interface, Max. 230Kbps Serial interface - RoHS compliant ASRB - USB All-made Reference Board for USB Devices - Simple and quick network implementation - Providing all source code, hardware schematic, and reference materials    that are dedicated to the function of USB to Ethernet - Available of firmware customization for various USB devices - Usable as a USB to Ethernet Gateway Module - High Stability and Reliability by using a W3150A+ WIZnet Chip, a    fully-hardwired TCP/IP stack - Easy and Powerful Configuration Program - 10/100 Mbps Ethernet Interface (Auto-Sensing) - 1 Full-Speed USB 2.0 Device - Support DHCP - Firmware Upgrading through Ethernet - RoHS Compliant

 

	Accessories	Sales Enquiry
	PHY & MAG
	WIZnet offers the following components to its customers, Ethernet PHY chip and MAG Jack are recommended for use with WIZnet's W3150A+ and other products. PHY - RTL8201CP-VD-LF  MAG JACK - RD1-125BAG1A(L/F) Single RJ45 connector module with integrated 10/100 BASE-TX Magnetics and LEDs
	MPLAB - ICD2