ess logo  
 
 
 
     
     
  Products  
     
 
 
     
 
 
     
  Events & Promos  
 
     
 

 

 

 
 
     
PC CAN Hardware
PC CAN Interfaces
PC CAN USB FD
 
The CAN-FD adapter PCAN-USB FD allows connection to CAN-FD and CAN networks via the USB port of a computer. A galvanic isolation up to a maximum of 500 volts decouples the PC from the CAN bus. Thanks to the simple application and its compact plastic housing, the adapter is ideally suited for mobile use.  The new standard CAN FD (CAN with Flexible Data Rate) is characterized above all by higher bandwidths during data transmission. The maximum 64 data bytes of a CAN-FD frame (instead of 8) can be transmitted at bit rates of up to 12 Mbps. CAN FD is down-compliant to the CAN standard 2.0 A / B, so that CAN-FD nodes can be used in existing CAN networks. However, the CAN-FD extensions are not applicable.  
 
 
 
 
PCAN-USB Pro FD
 
The PCAN-USB Pro FD adapter allows connection to CAN-FD and LIN networks via the USB port of a computer. Two fieldbuses can be connected at the same time, with up to four (2 x CAN FD, 2 x LIN) with corresponding adapter cables. Each CAN-FD channel is insulated separately from USB and LIN with a maximum of 500 volts. Thanks to its robust aluminium housing, the PCAN-USB Pro FD adapter is ideally suited for mobile applications.  The new standard CAN FD (CAN with Flexible Data Rate) is characterized above all by higher bandwidths during data transmission. The maximum 64 data bytes of a CAN-FD frame (instead of 8) can be transmitted at bit rates of up to 12 Mbps. CAN FD is downwards compatible with the CAN standard 2.0 A / B, so that CAN-FD nodes can be used in existing CAN networks. However, the CAN-FD extensions are not applicable.   
 
 
 
 
PCAN-USB
The PCAN-USB adapter allows uncomplicated connection to CAN networks. Due to its compact plastic housing, it is ideally suited for mobile applications.  With the opto-isolated version, a galvanic isolation of up to 500 volts is ensured between the PC and the CAN side.  The supplied CAN monitor PCAN-View for Windows ® and the programming interface PCAN-Basic complete the package.  
 
 
 
 
PC CAN PCI Express
The PCAN-PCI Express card allows the integration of a PC with PCI Express slots in CAN networks. There is a galvanic isolation between the computer side and the CAN side up to a maximum of 500 volts. The card is available as a single, two or four channel version.  The supplied CAN monitor PCAN-View for Windows® as well as the programming interface PCAN-Basic round off the package.  
 
 
 
 
PC CAN cPCI
The PCAN-cPCI card allows the integration of an industrial computer system with CompactPCI into CAN networks.  There is a galvanic isolation between the computer side and the CAN side up to a maximum of 500 volts. The card is available as a two- or four-channel version. The supplied CAN monitor PCAN-View for Windows ® and the programming interface PCAN-Basic complete the package.  
 
 
 
PC CAN miniPCI
The PCAN miniPCI card allows the integration of embedded PCs and laptops with mini PCI slots in CAN networks.  The card is available as a single or dual channel version. In the opto-decoupled versions, a galvanic isolation of up to 300 volts is provided between the PC and the CAN side.  The supplied CAN monitor PCAN-View for Windows ® and the programming interface PCAN-Basic complete the package.  
 
 
 
     
     
PC CAN Couplers & Converters
     
PCAN-Optoadapter
The PCAN-Optoadapter is a universal plug-in adapter for the galvanic decoupling of high-speed CAN bus systems.  Due to the integrated logic, decoupling is possible at any point in the CAN network.  The PCAN-Optoadapter can be used in CAN-FD buses with data transmission rates of up to 2 Mbit / s and nominal transmission rates of up to 1 Mbit / s.  
 
 
 
     
PCAN-Repeater DR
The PCAN repeater DR connects between two high-speed CAN buses with a galvanic isolation up to 5 kV. The two CAN channels as well as the CAN channels and the voltage supply are decoupled from each other. The entire messaging traffic including error frames is relayed between the two channels 1 to 1, if necessary only in one direction. The PCAN repeater DR behaves passively and is transparent from the point of view of the CAN bus. LEDs indicate the current bus status. With the H-rail housing and the support of the extended temperature range, the module is suitable for use in industrial environments.  The PCAN repeater DR can be used in CAN-FD buses with data transmission rates of up to 4 Mbit / s and nominal transmission rates of up to 1 Mbit / s.  
 
 
 
     
PCAN-LWL

For use in explosion-proof areas or in EMC measurements, a CAN line can be replaced by a fiber optic link at any point through the PCAN fiber optic cable. The implementation is carried out selectively on high-speed CAN or low-speed CAN. The modules are supplied externally.  The PCAN optical fiber can be used in CAN-FD buses with data transmission rates of up to 5 Mbps and nominal transmission rates of up to 500 kbit / s.

 
 
 
 
     
PCAN-AU5790

The PCAN-AU5790 bus converter provides a connection between a high-speed CAN bus (ISO 11898-2) and a single-wire CAN bus (SAE J2411). The possible applications of the bus converter include the simple connection of a CAN interface of the PCAN series (eg PCAN-USB) to a single-wire CAN bus.

 
 
 
 
     
PCAN-TJA1054

The PCAN-TJA1054 bus converter provides a connection between a high-speed CAN bus (ISO 11898-2) and a low-speed CAN bus (ISO 11898-3). The possible applications of the bus converter include the simple connection of a CAN interface of the PCAN series (eg PCAN-USB) to a low-speed CAN bus.

 
 
 
 
     
     
PC CAN I/O Modules
     
PCAN-Micromod

The PCAN-MicroMod as a plug-in module is a simple way to provide electronic circuits with I / O functionality and CAN connection. The configuration is carried out using a Windows® program, which transmits the configuration data to the module via CAN. Several modules can be configured independently of one another on a CAN bus.  With various PCAN-MicroMod basic boards, it is possible to be used in equipment and systems engineering as well as in the automotive industry. An optional evaluation board facilitates the entry and development of own base boards.

 
 
 
 
     
PCAN-Micromod Evaluation Board

The PCAN-MicroMod as a plug-in module is a simple way to provide electronic circuits with I / O functionality and CAN connection. The configuration is carried out using a Windows® program, which transmits the configuration data to the module via CAN. Several modules can be configured independently of one another on a CAN bus.  With various PCAN-MicroMod basic boards, it is possible to be used in equipment and systems engineering as well as in the automotive industry. An optional evaluation board facilitates the entry and development of own base boards.

 
 
 
 
     
PCAN-MicroMod Analog 1 & 2

The base boards for the PCAN-MicroMod provide an application-oriented environment. A wide supply voltage range as well as the protective circuitry of the inputs and outputs are typical features of this product group. CANopen ® firmware is available for all PCAN-MicroMod base boards.  The Analog 1 & 2 base boards meet general analog requirements.

 
 
 
 
     
PCAN-MicroMod Digital 1 & 2

The base boards for the PCAN-MicroMod provide an application-oriented environment. A wide supply voltage range as well as the protective circuitry of the inputs and outputs are typical features of this product group. CANopen ® firmware is available for all PCAN-MicroMod base boards.  The Digital 1 & 2 base boards serve general digital requirements.

 
 
 
 
     
PCAN-MIO

The Multiple Input Output Module (MIO) is a universal, modular control unit for industrial and automotive applications.  The module has two CAN interfaces as well as several analog and digital inputs and outputs. Incoming signals can be processed via the microcontroller and then output via the CAN interfaces or output channels. The behaviour of the PCAN-MIO module is freely configured for this with a comprehensive Windows ® software. To create such a configuration, the user is provided with a plurality of function blocks and other settings.  In addition, the bus structure allows the inputs and outputs to be extended by additional modules. Customer-specific requirements can be implemented here.

 
 
 
 
     
PCAN-GPS

The PCAN-GPS is a freely programmable sensor module for position and position determination. It has a satellite receiver, a magnetic field sensor, an acceleration sensor and a gyroscope. The acquired data can be transferred to a CAN bus and recorded on the internal memory card. Data collected is processed by a microcontroller of the NXP LPC4000 series.  Using the supplied library and the GNU-ARM-Toolchain Yagarto (contains the GNU Compiler Collection GCC for C and C ++), a separate firmware can be created and then transferred to the module via CAN. This provides a wide range of possibilities for manipulating, evaluating, filtering and routing data traffic.  When delivered, the PCAN-GPS is equipped with a demo firmware, which regularly sends the raw data of the sensors on the CAN bus. The source code of the demo firmware as well as other programming examples are included in the scope of delivery.

 
 
 
 
     
     
PC CAN Diagnostics & Education
     
PCAN-MiniDisplay

The PCAN MiniDisplay is used as a human-machine interface for the visualization of CAN data. For connection to CAN buses, it has a high-speed and a single-wire CAN connection. The graphical representation of incoming CAN data is configured before the device is used and is then carried out via a TFT display.  The PCAN MiniDisplay can also be used as a data logger. In this case, the message traffic is recorded on a memory card and can be evaluated on a PC. 

 
 
 
 
     
PCAN-Diag2

PCAN-Diag 2 is a handheld diagnostic device with versatile functions for examining a CAN bus, such as the determination of the CAN transmission rate, the bus load measurement or the termination measurement. In addition to receiving CAN messages, individual and complete message sequences can be sent. In addition, the internal memory card allows the recording and playback of the message traffic.  The integrated 2-channel oscilloscope enables the representation of the CAN signals, whereby individual CAN-IDs as well as different events can be used as triggers. The CAN frames are decoded based on the analogously recorded course, to detect, for example, errors in the frame. 

 
 
 
 
     
     
Routers & Gateways
     
PCAN-Ethernet Gateway DR

The PCAN Ethernet Gateway DR allows the connection of different CAN buses over IP networks. For this purpose, CAN frames are packaged in TCP or UDP message packets and forwarded from one device to another via the IP network.  The PCAN Ethernet Gateway DR provides a LAN port and two high-speed CAN interfaces for this purpose. With the H-rail housing and the support of the extended temperature range, the module is suitable for use in industrial environments.  The device is configured via a comfortable web interface. In addition to various status information, settings for the device itself, for the individual communication interfaces and for message transfer are available here.

 
 
 
 
     
PCAN-Router

The PCAN router is a two-channel CAN module which offers the possibility to use the CAN messages of both channels flexibly through the freely programmable microcontroller of the NXP LPC21 series. This provides a wide range of possibilities for manipulating, evaluating, filtering and routing CAN messages. Using the supplied library and the GNU-ARM-Toolchain Yagarto (contains the GNU Compiler Collection GCC for C and C ++), a separate firmware can be created and then transferred to the module via CAN. When delivered, the PCAN router is equipped with a demo firmware, which carries out a 1: 1 forwarding of the CAN messages between the two channels at 500 kbit / s. The corresponding source code is included as an example. The module is housed in an aluminum profile housing and is delivered in variants with two D-sub connectors or a screw terminal block.

 
 
 
 
     
PCAN-Router Pro

With the PCAN router Pro, the data traffic of four high-speed CAN buses can be linked to one another as desired. The behavior of the router is configured using the included Windows program PPCAN editor via the CAN bus. In addition to the pure forwarding, CAN data can be processed, manipulated and, for example, filtered. For the creation of a configuration, the user has a large number of function blocks and other settings available. In addition, a virtual fifth CAN channel allows the recording of all data traffic on a CompactFlash card.  As an alternative to the standard firmware, which is provided with the PCAN router Pro at the time of delivery, it is possible to create and use its own firmware based on the ARM microcontroller NXP LPC2294. Included in the package are a library and the GNU-ARM-Toolchain Yagarto (contains the GNU Compiler Collection GCC for C and C ++). 

 
 
 
 
     
PCAN-LIN

PCAN-LIN enables communication between CAN, LIN and serial devices. The various modes can be set via a configuration software. For example, the module can request data as a LIN master and send the received LIN data to the CAN bus and / or the serial interface. Data can be passed between CAN and LIN with ID offset.