Embedded Artists’ AOAA Kit is a standalone platform for evaluation and prototyping electronic accessories for Google’s Android operating system. It lets you get up-and-running with AOA experiments immediately. The AOAA board is also suitable for experimenting with CAN, Ethernet and RF networks.

The board has been developed by Embedded Artists in close cooperation with NXP. It contains two microcontrollers from NXP, the LPC1769 (Cortex-M3 core) and LPC11C24 (Cortex-M0 core). The two microcontrollers are connected via an on-board CAN network.

The Low-power Application Kit (Oryx) with NXP's LPC11U37 ARM Cortex-M0 microcontroller has been designed to make it as easy as possible to get started with Cortex-M0 and low-power designs.

The board demonstrates low-power design techniques both in hardware and software. Includes an extensive user's manual and many sample applications.

The LPC11U37 has 10 kB SRAM, 128 kB Flash, 4 kB E2PROM, USB 2.0 Full-Speed Device, SSP, I2C, UART, ADC, etc.

Embedded Artists' 1.5 inch RGB OLED Module adds color graphics capabilities to your project.

The module used the UG-2828GDEDF11 OLED from Univision Technology with integrated controlled chip SSD1351 from Solomon Systech.

The display has an SPI or 8-bit parallel interface and is simple to control. The display module connects to Embedded Artists' standard 14-pos expansion connector, and then uses the SPI interface. Several of our products have the serial expansion connector on-board. More modules are found here.

A small graphical library for the display, with basic drawing operations, can be downloaded from our support page after purchase of the display.

Embedded Artists' 1.35 inch Memory LCD Module adds graphics capabilities to your project.

The module used the LS013B4DN04 Memory LCD from Sharp, based an ultra low-power display technology. Power consumption is only 4�A with an up-date rate of 1Hz and as low as 2�A for a static image.

The display has an SPI interface and is simple to control. The display module connects to Embedded Artists' standard 14-pos expansion connector. Several of our products have the connector on-board. More modules are found here.

A small graphical library for the display, with basic drawing operations, can be downloaded from our support page after purchase of the display.

Embedded Artists' 2.7 inch E-paper Display module adds graphics capabilities to your project.

The module use the EM027AS012 from Pervasive Displays.

The EM027AS012 display is also sold separately (for own designs).

The display has an SPI interface and some extra control signals. The display module connects to Embedded Artists' standard 14-pos expansion connector. Several of our products have the connector on-board. More modules are found here.

Technical details about how to interface the display can be found on the RePaper site.

Embedded Artists' 3.2 inch QVGA LCD Display adds graphics capabilities to your Developer's Kit.

The interface to this display can be directly to an external 8-bit or 16-bit memory bus or it can just as well be an emulated GPIO bus from processors without external memory interface. A serial (SPI-like) interface is also present. A simple 2x20 pin list (2.54mm pitch) is used to interface the display.

Integrated display controller with embedded display RAM.

A small graphical library for the display, with basic drawing operations, can be downloaded from our support page after purchase of the display.

The AT070TN84 is a 7 inch TFT LCD Display with resolution 800x480 from Innolux. This is the same display as used in Embedded Artists LCD Board, 7 inch TFT 800x480

Embedded Artists' Display Expansion Board adds graphics capabilities to your LPC1788 Developer's Kit, LPC3250 Developer's Kit, LPC4088 Developer's Kit and LPC4357 Developer's Kit.

Display graphics on a monitor/TV via the HDMI / DVI / VGA interface or connect an LCD with LVDS interface to your LPC microcontroller!

The display has an RGB interface. A simple 2x25 IDC connector (2.54mm pitch) is used to interface the display board. This IDC connector is compatible with the LCD Expansion Connector of the OEM Base Board.

A small graphical library for the display, with basic drawing operations, can be downloaded from our support page after purchase of the board.

Embedded Artists' 4.3 inch (480x272 pixel) TFT LCD Display adds graphics capabilities to your LPC1788 Developer's Kit.

The display has a RGB interface. A simple 2x25 IDC connector (2.54mm pitch) is used to interface the display board. This IDC connector is compatible with the LCD Expansion Connector of the OEM Base Board.

A small graphical library for the display, with basic drawing operations, can be downloaded from our support page after purchase of the display.

Embedded Artists' 7 inch (800x480 pixel) TFT LCD Display adds graphics capabilities to your LPC1788 Developer's Kit, LPC3250 Developer's Kit, LPC4088 Developer's Kitand LPC4357 Developer's Kit.

The display has an RGB interface. A simple 2x25 IDC connector (2.54mm pitch) is used to interface the display board. This IDC connector is compatible with the LCD Expansion Connector of the OEM Base Board.

A small graphical library for the display, with basic drawing operations, can be downloaded from our support page after purchase of the display.

Embedded Artists' QVGA Display adapter lets you connect the 3.2 inch QVGA display to the OEM Base Board using the RGB interface. 16-bit color depth is supported. The OEM Base Board is used in the LPC1788 Developer's Kit.

Embedded Artists' QVGA Display adapter lets you connect the 3.2 inch QVGA display to the OEM Base Board using the RGB interface. 16-bit color depth is supported. The OEM Base Board is used in the LPC1788 Developer's Kit. This kit contains the display adapter, an IDC Ribbon Cable, and the 3.2 inch QVGA LCD Display.