Embedded Systems Solutions logo  
 
 
 
     
     
     
 
 
     
  Events & Promos  
 
     
 
Auvidea logo
 
 
     
  Carrier boards for the NVIDIA Jetson Nano compute module  
     
 
Model Support ed Jetson USB Po rts Ethernet Ports Cooling System Camers (MIPI) Other Interfaces
JN20 Nano 3 2 Fan 4 CAN, 2x I2S, 3x I2C, HDMI
JN21 Nano 3 2 Fan 2 CAN, 2x I2S, 3x I2C, HDMI
JNX22 Xavier NX / Nano 2 2 Fan M.2
JN30 Nano 1 Fan 4 POE, CAN, HDMI, DP
JN30-LC Nano 3 1 Fan 2 POE, CAN, UART, HDMI
JN31 Nano 4 1 Fan 4 CAN, HDMI
JNX30 Xavier NX / Nano 3 1 Fan 4 HDMI, M.2, PCIe x 4, POE
JNX80 Xavier NX / Nano 2 1 Fan 2 2x CAN, UART, HDMI
 
     
     
  ES-JNX80/ES-J180 embedded system for dual NVIDIA Jetson Nano/Xavier NX/TX2   ES-JNX80/ES-J180 embedded system for dual NVIDIA Jetson Nano/Xavier NX/TX2

Jetson Nano/Xavier NX/TX2 dual embedded system with integrated 5 port GbE switch. 2 HDMI and 2 USB 3.0 ports (one port routed to each module). 1 GbE RJ45 port as uplink. 2 GbE ports to each module plus 2 spare GbE ports for internal expansion.
 
     
 
  • 2 x JNX80 for NVIDIA Jetson Nano (ready for Xavier NX)
  • 2 x J180 for NVIDIA Jetson TX2
  • or mixed: with 1 x JNX80 and 1 x J180
  • Optional with UPS supercap board

Note: the pictures show the prototype case with a 3D printed front plate. The production version will have an aluminum front plate. Availability: beta prototypes now, production version in March 2020.
 
     
 
Learn More Sales Enquiry
Scroll Top
 
     
     
  ES-JN21 embedded system for NVIDIA Jetson Nano

The ES-JN21 is a compact carrier board for the Nano. It is designed for embedded systems without monitor. 2 network interfaces support a network uplink and the connection of a network IP camera. LTE and Wifi may be added with U100 module. A typical application is a license plate recognition system (ALPR).

Cost reduced LC variations will be available soon.
  ES-JN21 embedded system for NVIDIA Jetson Nano  
     
 
Learn More Sales Enquiry
Scroll Top
 
     
     
  JN30B-LC carrier board for the Jetson Nano   JN30B-LC carrier board for the Jetson Nano

This new JN30B-LC carrier board turns the Jetson Nano compute module into a super mini-computer. The JN30B supports easy automatic flashing (just connect the USB OTG cable).

This carrier board is only compatible with the Jetson Nano production version module!

For a complete setup, you will also need:

 
     
 
Learn More Sales Enquiry
Scroll Top
 
     
     
  JN30B Carrier Board for Jetson Nano Production Module Rev. 9 (PoE PD)

This new JN30B carrier board turns the Jetson Nano compute module into a superminicomputer. The JN30B supports easy automatic flashing (just connect the USB OTG cable) and high-performance storage (M.2 NVME PCIe x4).

This is revision 5 of the board, which has PoE PD.

This carrier board supports only the Jetson Nano production version!

For a complete setup, you will also need:

  JN30B Carrier Board for Jetson Nano Production Module Rev. 9 (PoE PD)  
     
 
Learn More Sales Enquiry
Scroll Top
 
     
     
  JN34 carrier board   JN34 carrier board (cable extension for MIPI CSI-2 cameras)

All Jetson compute modules feature multiple MIPI CSI-2 interfaces for low overhead connection of high resolution cameras. The FPD-Link III interface overcomes the major short coming of the CSI-2 interface - its short cable length.

  • JN34 carrier features 6 FPD-Link III interfaces
  • Supports Nano today (Xavier NX is planned)
  • FPD-Link III supports CSI-2 over coax cable
  • Up to 15m cable length
  • Power over Coax
  • Optional: embedded system in aluminum enclosure
 
     
  The JN34 features four TI DS90UB954 (DS90UB954TRGZRQ1?) dual 2 MPixel FPD-Link III deserializers to connect to 2MPixel/60fps camera & radar sensors (up to 1080p60 each). A driver is under development.  
     
 
Learn More Sales Enquiry
Scroll Top
 
     
     
  JN31 carrier board for Jetson Nano module (actively cooled)

The JN31 is a alternative variation of the JN30 and is designed for systems in plastic housings which are cooled by a fan. JN30 is designed for passively cooled systems. The JN31 offers 2 different power connector options:

  • Power connector on the front side (38379)
  • Power connector on the fan side (38379-1)
  JN31 carrier board for Jetson Nano module  
     
  The JN31 only supports the production version of the Nano module. Nano modules from the dev kit feature an incompatible pinning and are therefore not supported. Please select the JN30A carrier board, if you have a dev kit module.  
     
 
Learn More Sales Enquiry
Scroll Top
 
     
     
  JNX30-PD (PoE-PD) carrier for Nvidia Nano   JNX30-PD (PoE-PD) carrier for Nvidia Nano

The JNX30 is a compact carrier board for the Jetson Xavier NX (and Nano). It supports the MAXN mode of the Xavier NX and adds CAN and PCIe x1 (compared to the JN30).

The JNX30 is also available as low cost version (JNX30-LC). The JNX30-LC-PD version adds powering by PoE from a network switch (PoE-PD: 802.3at) and a micro SD card. The full version of the JNX30 is available in 2 flavours: PoE-PD (powered device) to be powered by a network switch or PoE-PSE (power sourcing equipment) to power a network IP camera.
 
     
 
Learn More Sales Enquiry
Scroll Top
 
     
     
  Jetson Nano embedded and barebone systems

A Jetson Xavier NX and a dual Jetson Nano version is in development. The barebone system includes: JN30 carrier board, passively cooled aluminum case (135x109x50mm), leaf spring, heat spreader and mounting material. With a small NRE charge the front plate may be customised.
  Jetson Nano embedded and barebone systems  
 
4 versions Jetson Nano module flashing service carrier
embedded system  Jetson Nano production module installed ready to boot
(OS installed)
JN30B
bare bone without compute module
(install your Nano production module)
flash yourself  JN30B
bare bone (devkit B) without compute module (install your
Nano dev kit module)
program SD card JN30B
bare bone (devkit A) without compute module (install your
Nano dev kit module)
program SD card  JN30A
 
     
 
Add on modules Features
U110 (38363) 4x USB 2.0 to 100bT Ethernet with 26W PoE PSE
4x Ethernet ports
3 connector options: RJ45, IX or JST-GH)
U100 (38372) 2x M2 (LTE and WIFI) and 2x USB 2.0 JST-GH
U120 (38385) 4x USB 2.0 type A
38391 dev kit camera module and 2x GbE (i210 – JST-GH)
38392 dev kit camera module, 1x GbE (i210 – JST-GH) and mini UPS controller (supercaps)
 
     
  The mini UPS controller supports 4 supercaps (25F to 70F) to power the unit up to a few minutes for a graceful power down in case of a power outage. The modules above may optionally be installed in the aluminum housing and the additional connectors are brought out on the back plate. These embedded systems are special order items. Please contact Auvidea sales for pricing and availability.  
     
 
  LC LC-PD POE-PD POE-PSE
Power In 12V 12-48V 12-48V 12-48V
GbE (PoE) 1x GbE 1x GbE (PoE PD) 1x GbE (PoE PD) 1x GbE (PoE PSE)
Display Port  – 1 1
HDMI 1 1 1 1
USB 3.0 1 type A 1 type A 1 type A 1 type A
USB 2.0 2 (micro USB and JST-GH) 2 (micro USB and JST-GH) 2 (micro USB and JST-GH) 2 (micro USB and JST-GH)
automatic flashing yes yes yes yes
M.2 NVME 2230 – 2280 PCIe x4 slot no  no   yes  yes
CSI-2 2 2 4 4
 
     
  A power supply is optional. Please select one with 5.5/2.5mm power plug and the appropriate voltage and power rating. The PD (powered device) version supports PoE (power over Ethernet) to power the this embedded system from an Ethernet switch. The PSE (power sourcing equipment) version powers a PoE device such as a network camera (max 13W).  
     
 
Learn More Sales Enquiry
Scroll Top